Alientech Kess3 Update : 𝗪𝗼𝗿𝗸 𝗻𝗼𝘄 𝗼𝗻 𝘁𝗵𝗲 𝗕𝗼𝘀𝗰𝗵 𝗗𝗤𝟯𝟴𝟭 𝗠𝗤𝗕 𝗧𝗖𝗨𝘀 𝗼𝗳 𝗺𝗼𝗱𝗲𝗿𝗻 𝗩𝗔𝗚, 𝗖𝗼𝗻𝘁𝗶𝗻𝗲𝗻𝘁𝗮𝗹 𝗗𝗣𝗦𝟲 𝗶𝗻𝘀𝘁𝗮𝗹𝗹𝗲𝗱 𝗼𝗻 𝗙𝗼𝗿𝗱 𝗮𝗻𝗱 𝗔𝗖𝗗𝗲𝗹𝗰𝗼 𝟲𝗧 𝗳𝗼𝗿 𝗚𝗠 𝗮𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗰 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻𝘀.
Four new remapping protocols enable you to increase your tuning. So you can your new tuning and ECU remapping calibration on dozens of new vehicles. Connect to the TCUs that are equipped on the Audi, Daewoo, Buick, Chevrolet, Skoda, Ford, Holden, Seat, and Volkswagen vehicles.
Discover more all details here: Contact Us
What’s the difference between a Kess 3 salve and a Kess 3 master tuning tool? Tuning also known as engine remapping is the process of modifying a vehicle’s software held on the engine control unit (ECU) to improve its performance and / or fuel economy. The process is done through the use of tuning tools, which enable the vehicles software to be copied from the ECU.
The Alientech Kess is designed for this exact purpose. There two types of Kess3 tuning tools, master tools and slave tools. Here are the main difference between the Kess 3 master and the slave tool option.
The master Alientech Kess3 is designed to be used by trained professionals in a workshop / dyno setting. The master kess3 is a little more expensive. And offers a wider range of features and capabilities compared to slave tools. They are typically used to write new software onto the ECU. Hence allowing for the modification of a wide range of engine parameters such as fuel injection, ignition timing, and boost pressure.
Software can be written onto the ECU to modify fuel injection parameters, ignition timing, boost pressure. As well as many other engine parameters.
In addition to writing new software onto the ECU. The Alientech Kess 3 can also be used to clone many types of ECU’s too
The slave kess3 is designed for use by non-professional enthusiasts. They are typically cheaper and less feature-rich than master tools. Rather than being able to write new software onto the ECU. Slave tools are used to read and modify existing software. This means that the range of engine parameters that can be modified is more limited compared to a master tool.
The Slave Kess3 is often seen as easier to use than the master option. While the physical process is reading and writing the software to teh ECU is the same on both options. The Salve tool uses new ECU files written for the tool. As such the operator does not need to write their onw tuning software.
This can make it an ideal tool option for those new to tuning. Or those that simply don’t want the hassle of writing their own tuning files.
If you are not sure which option is right for you. Mail the service and support team now for a friendly talk through the options. Or book in for one of our free no obligation training and demonstration sessions. – Contact us
You can see the full range of Alientech Kess3 tools and protocol options here in the Alientech Tuning. Shop : Alientech Kess3
Worldwide sales, fast international delivery – Tax free sales to most locations.
Where is the best place to buy Alientech Kess3. The all new Kess3 is available and in stock at many resellers. So there is now quite a lot of choice as to where you can purchase your new tuning tool from.
Offer fast direct delivery Alientech Tuning Tools are here to help. All tools come with technical support, set up and training. The support service is open seven days a week,
As the largest direct supplier of Alientech tuning tools in Europe. The Alientech Kess 3 hardware is in stock ready to ship. Direct door to door delivery is available around the world. And international sales are also tax free. All Kess 3 cable and accessories are in stock too. As well of course as full access to add all the master protocols and the software activations you want.
And should you need it, original files and tuning files are available to master master tuners.
Alientech Kess 3 salve tools are available from stock too. Slaves can paired to any master the purchase requires. And if you don’t already have a master tuner supplying your tuning files. & day a week file and support service is on hand to help with all aspects of your tuning and remapping.
It’s a worldwide service, with tuning tool sales, as well as tuning files being tax free to international customers.
If you would like to learning more about the Alientech Kess 3 please see this page where you will find details and training videos. Alientech KESS3
Alternatively, you can see the Kess3 for sale here in the shop here: Alientech Kess 3 Hardware
Or contact the service and support team with any questions here : Contact Us
The Alientech KESS3 Tuning and Remapping Tool is in stock ready to ship. The new Kess3 tuning system offers both OBD, Bench and Boot programming in once device.
Alientech KESS3 tuning platform is the most advanced engineering achievement for the tuning and remapping industry. In terms of functionality, convenience, and use the Alientech Kess 3 is unmatched buy any other system available.
Providing a simple and straightforward interface to most gearbox and engine control units on the market, the Alientech KESS3 is an ideal solution. Suitable for everyone, from the most specialized tuning technicians to the new tuners wanting to expand their tuning knowledge and vehicle coverage
Kess 3 Chiptuning and remapping for Engine and Gearbox ECU control units with a single tool.
The Alientech KESS3 remapping tool offers three modes of operation. The tuning is available in OBD mode, Bench mode, and Boot mode.
The On Board Diagnostic plug provides access to all ECU data in the OBD mode.
You can access all the data files from the ECU connector with BENCH – a smart interface
And, you can access all system data areas in the Boot remap and tuning mode. Read, write, and clone ECUs and more.
The Kess 3 is a single flexible tuning and remapping tool that can be configured as required by adding either master or slave tuning protocols
Master : With this option, you can edit the software files in an independent manner. And as such, the read files can be loaded into your choice of tuning file editing software.
Slave: if you are unable to write your own tuning software. Or just don’t want the hassle. Using the slave tool option, you will be able to find a master tuner and file provider who will be able to provide you with the files you need. In addition. We can also offer a live tuning file service and support 7 days a week if required. As such we will be happy to assist with tuning file services
From 1991 Alientech have been designing and developing ECU Remapping and Chiptuning tools. All this experience has been incorporated in the new Kess3 tuning tool.
Fast Performance
The new Kess USB hardware delivers a 10x increase in the performance speed of remap software files to and from the KESS3 tool. In addition, the Kess also has a new web infrastructure, this makes the KESS3 even quicker. And thus, the result is the cloud-based operations give better speed and performance over other tuning devices.
Compatibility List
The list of tuning protocols and vehicle coverage is simply huge! You can see the list online here: www.alientech-tools.com/vehicles. And in addition, technical use and instructions are also available in multiple languages
All tools come with free set up support, training and installation guidance
Alientech gives flexible activation and protocol set-up that best suits your business. Therefore, you can choose the best configuration based on the tuning work you have today. With the option to add what you may require tomorrow.
You can see the full range of Alientech Kess 3 tuning tools, software here in the Shop: Kess3 Products
Worldwide sales to almost all destination. Tax free with fast door to door delivery
And if you have any question, or need help and advice, contact us here: Contact Us